Carlon E381DR Switch Box, Rectangular, PVC, Gray
Weatherproof for use with non-metallic wiring systems. Non-conductive, non-corrosive and impact-resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2 in threaded ports, one on each end and one in the back. UL listed.
COVER BOX SQ PVC 2G BLANK GRAY
COVER BOX SQ PVC 2G BLANK GRAY
2-gang square blank cover. Compatible with Carlon 2-gang FS boxes, non-metallic and metallic. Supplied with stainless steel mounting screws and gasket. Will not rust or corrode. Gray.
RACO 907C Exposed Work Cover, 4-3/16 in L, 4-3/16 in W, Square, Galvanized
Used to mount two duplex receptacles on a box in surface mount application. Raised 1/2 in. 6-1/2 cu-in capacity. 4 in square. UL listed.
RACO 127 Octagon Box, 1-Gang, Steel, Gray
Two 1/2 in and two 3/4 in conduit knockouts (sides). Two 1/2 in and two 3/4 in conduit knockouts (bottom). No bracket. Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 lb maximum recommended static load. Acceptable for use in 2 hrs fire rated walls. UL listed. UPC bar code.
RACO 8190 Outlet Box, Knockout Cable Entry, 16-Knockout, Steel
Used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. Drawn construction and raised grounding provision for exposed work or surface mount applications. Combination cover screw heads provide for faster mud ring/cover installation. Twelve 1/2 in conduit knockouts (sides). Four 1/2 in conduit knockouts (bottom). No bracket. 4 in square x 1-1/2 in deep and 21 cu-in capacity. UL listed, acceptable for use in 2 hrs fire rated walls. UPC bar code.
RACO 8232 Outlet Box, Knockout Cable Entry, 16-Knockout, FM Bracket
Designed to enclose electrical wiring, switches, receptacles or lighting fixtures. Constructed from 1/16 in pre-galvanized steel. 8-32 cover mounting screws assembled.
RACO 8753 Electrical Box Cover, 4 in L, 4 in W, Square, Galvanized Steel
Steel box cover with single 1/2 in knockout in the center. 4 in square. Angled mounting slots allow for correction of box misalignment. UL listed.
RACO 8772 Electrical Box Cover, 4 in L, 4 in W, Square, Galvanized Steel
Used to close outlet box. For mounting switch or receptacle. Size 4 in x 4 in, steel, UL listed.
RACO 8660 Handy Box, 1-Gang, Steel, Gray
Used for convenience outlets, switch boxes or small junction boxes. Drawn construction and raised grounding provision. Acceptable for use in 2 hrs rated walls. Six 1/2 in knockouts (sides). Two 1/2 in knockouts (ends). Two 1/2 in knockouts (bottom). 4 in x 2 in x 1-7/8 in. 13 cu-in capacity. UL listed.
HUBBELL 5374-0 Cover, 4-1/8 in W, Round, Aluminum, For 4 in Round Splice Box
For use with 4 in round splice boxes. Installation hardware and gasket included. 4 in Dia, shrink wrapped. UL listed.
Carlon A58381D-CAR Outlet Box, Knockout Cable Entry, 3-Knockout, Bracket
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in x 2-1/4 in x 1-7/8 in. UL listed.